10% OFF for DIY Plus X device Use Code: WALA10OFF
Tue. Oct 4th, 2022
leaking water pipes in walls
truoba house plans
Spread the love

Many renovations and home decor projects greatly consider or avoid leaking water pipes in walls when they would need to cut or drill holes in the walls. It is critical to ensure that you don’t damage leaking water pipes in walls during the construction process when remodeling your bathroom or kitchen where there is always the highest possibility of having leaking water pipes in walls.

Broken pipes, leaking pipes, and seepage in walls can all come from the failure of in-wall plumbing. A good water pipeline system and electrical network infrastructure are the foundation of a well-built home. Water pipelines distribute both cold and hot water throughout the home. Such water pipelines are located behind the walls, and it is necessary to locate them to repair any leaks or to progress when they have a defect.

Positive signs of pipe leaking behind wall

1. Unusual increase in water bills

increased bills

when you begin to see your bills unusually different from what you normally pay, then you must go a step further to find out what’s wrong. There could probably be a secret leak somewhere in the wall which is not visible to the naked eyes.

2. Persistent musty odours

leaking pipes in walls

because water seeps and stays in the wall, the area where it stays becomes constantly damp and begins to produce a terrible odour that is musty. it is so powerful that no matter how much you try, the odour overpowers the natural smell you should naturally perceive.

3. Mold in unusual areas

leaking pipes in walls

when you see mold or mildew in the bathroom or anywhere in the house that is naturally wet, it is ok and nothing to worry about but when you begin to see or notice this in usually dry areas, then, its a positive high tendency sign that you have leaking water pipes in walls.

You should be worried.

4. Odd discoloration

leaking water pipes in walls
Source: blog.wallpaperwarehouse.com

When water leaks through a wall, the exterior surface of the area will ultimately become discolored. the original colour of the wall becomes dull and wet. Look for areas where the wall’s surface is somewhat washed out or has a lighter hue than the surrounding region, whether it’s wallpapered, drywall, or even wood.
The discoloration is most likely uneven in form.

5. Stains that grow bacteria or organisms

leaking water pipes in walls
Source: aceplumbingkansas.com

Most times these stains start so small but gradually grow bigger and become very visible to the eyes. the leak allows organisms to grow in the wet area because they dwell happily in this environment.

6. Peeling or bubbling wallpaper or paint

leaking water pipes in walls
Source: buzzplumbing.com.au

Water leaks behind walls are more prone to form a bubble-like appearance. As the water affects the texture of paint or wallpaper, allowing it to produce bubble-like formations.
In rooms that don’t get much use, this hint is easy to overlook. Sheetrock that remains damp due to an undiscovered leak is to blame when you find wallpaper splitting along seams or paint bubbling or peeling off the wall.

7. Wet floors/ walls

leaking water pipes in walls

When you know that there has been no rain in a while, it’s possible that you see wet floors or walls. this is an indication that there are leaking water pipes somewhere around the house. Water always finds its level. that wet point might just be a gathering point for the leak.

8. Cracks in or around the foundation

cracks around foundation

Ofcos, buildings naturally settle over time causing minor cracks here and there but you must be conscious if suddenly you notice a wide gap or crack around the walls of the house spanning from the bottom upwards. Be quick to check for a pipe leak as this might be a major cause other than the settlement itself.

9. Clogged eaves, and downspouts

clogged eaves or downspouts
Source: gutterfoam.com

Sometimes, not all leaks happen as a result of leaking pipes.

The source of your water leak could possibly be from the eaves of your roof or clogged downspouts. If your roof eaves or downspouts are blocked from excess rainfall (or snowmelt), it will cause water to retain at that spot, or around that area which will ultimately soak through your roof and walls as a result of stagnancy which will eventually cause leaks. this is because water will always find its way.

Simply remove the obstructing debris to allow the water to flow freely.
Even if you don’t see water leaks in your walls, you should make it a point of duty to regularly clean your roof eaves and downspouts.

10. Slowly warping walls or ceiling sheetrock

Sheetrock is a type of plasterboard that is made of gypsum boards laid in between sheets of heavy paper.

Naturally, sheetrock attracts moisture, and to worsen it, if the pipes in the sheetrock are leaking, it can cause the sheetrock wall to flex, bend or twist. Sheetrock that has warped or bowed is a definite symptom or sign of a gradual water leak.

11. Wet blotches

leaking water pipes in walls
Source: garrattsdamp.com

Wet stains on walls are definite symptoms of water damage, but they don’t necessarily indicate where the problem is. Water can seep down a pipe, resulting in damp blotches on the wall below the leak or as a result of clogged eaves or blocked downspouts

12. Water dripping sound

water dripping on floor

You may be able to identify a water leak even if it isn’t creating noticeable damage but when you pay extra close attention to the first few seconds after turning off the shower, flushing the toilet, or turning off the sink. A leaky pipe might be the source of a faint dripping sound coming from the wall. You’ll have a tougher difficulty hearing a leak if you have an older house with iron pipes.

causes of leaking pipes in walls

plumbing pipes on the surface

In the old, pipes are always on the surface of a building, with time, it has been realized that the pipes get damaged easily

plumbing pipes in walls

hence, hiding them in the walls became purposeful to protect them from quick damage and to also aesthetically enhance the building.

The following are the major causes of leaking pipes in walls:

  • Galvanized steel, coated lead, or copper, can corrode, resulting in certain spots becoming weak caused by long usage or wear and tearwhich can lead to leaks.
  • The connection between the pipes, particularly around corners or curved areas, might weaken and create leaks.
  • Amateur or improper plumbing works which can cause pipe burst or leakage from pressure.
  • During winter period, freezing reduces the strength of pipes. this can also cause leakage.

Gadgets or tools that help find leaking Water Pipes in Brick Walls

gadget or tools

There are a few occasions when you will need water pipe detecting gadgets or tools. If you detect a leak in one of the brick walls as a result of rust or some other unidentified cause. Or perhaps you need to discover the precise location of water pipes through water pipe detectors, in your house and you are thinking about improving or renovating your home. You can easily detect pipes in brick walls if you have the right gadgets or tools.

A step-by-step approach to locating pipes in any brick wall can be found here:

  • Stud Finder
construction hi-tech gadgets

For determining the placement of water pipes in the wall, a high-quality stud finder pipe detector is ideal. Select a type that identifies the type of substance observed. You will know if you have discovered a wooden component, metallic subject, electrical cable, or a pipeline if you do this. You can customize your work without tearing a hole in your brick wall this way.

Although wooden studs are hidden beneath drywall or panels, there is frequently a space between the in-wall pipelines and drywall. Get a stud finder with a profound scanning mode to accommodate this and discover recessed pipelines. This will greatly improve the accuracy of finding all sorts of pipes either metallic or non-metallic.

  • Metal Detector
metal detector

Since brick walls are so thick, standard stud finders may not be able to detect metals within them. You will need equipment or gadget that can detect metallic objects at deeper levels in that instance. A metal detector is a good option. Running a metal detector down your brick wall might seem a little strange, but it is a good way to find copper piping.

If your plumbing employs plastic pipes, this solution will not work. If you don’t get a signal from your metallic pipe detector, consider that. Water pipes may well be present in your brick walls, but they are unlikely to be copper pipes.

  • Infrared Detector
infrared device

If your brick walls contain plastic pipes installed through them, an infrared wall scanner is indeed a better solution.  Heat signals can be detected by infrared through several objects. You may have to purchase a proficient infrared scanner because the stone is more difficult to permeate than other surfaces.

The disadvantage of this technology is that it can only be used to detect hot water lines. You would not notice anything if the pipelines in your brick walls don’t utilize hot water. You can certainly focus on detecting cold water, but it will not be as precise as finding hot water.

  • Scanner
detection wall scanner

Another piece of equipment that can assist you to locate water pipes inside a brick wall is indeed a detection wall scanner. This tool works by gazing through objects and alerting you if there is something beyond it. The issue is that it is unable to identify the specific object. As a result, the detection scanner might alert you to the presence of studs, architectural supports, or pipelines. This gadget, on the other hand, can assist you to figure out what’s on behind your brick wall if you are desperate.

  • Attic Inspection Method

Water pipelines can sometimes be seen coming down from the attic, though this approach may not work for everyone. They are also routed through the basement on occasion. The pipelines are then routed vertically through the walls and horizontally to various locations throughout the house. That implies you can detect the water mains in either your basement or attic by inspecting them. Once you have located the water pipes, you will be able to determine where they run through your interior walls.

This strategy necessitates a thorough understanding of your home’s layout. To find out where the pipelines are installed, make observations in your attic and then on the main floor. You can tell if a pipe is passing through a slot by measuring it.

  • Borescope Detector
borescope gadget
Source: amazon.com

By inspecting your walls firsthand, you may eliminate the uncertainty of locating pipes. Without pulling up any drywall, you can see what is behind your walls. A borescope camera is sometimes used to view through a narrow hole in the brick wall. The majority of new borescope types are compatible with cellphones, allowing you to view the video stream. This is a quick way to see what is going on behind your house walls. A little hole bored through your wall is all that is needed for the borescope camera to peek inside. This is much more preferable than ripping off a whole area of drywall because it can be fixed.

How to repair leaking pipes in walls

Because the pipes are inside the walls, plumbers take great care to ensure that the existing structure is not harmed. They will, however, need to get access to the pipes in order to locate and repair the leaks. There are several competent plumbers, plumbing gadgets, and devices available to locate clogs and leaking pipes in walls. Once they’ve located the leak, they have a few alternatives for fixing it.

Some pipes may merely be worn in places, in which case the plumber may be able to inject sealant into the pipes to strengthen them. A good plumbing company may, on the other hand, be required to make small holes in the walls in order to repair or replace pipes and fittings.

Conclusion

To summarize, water pipes and even electrical networks in the walls are easy to locate. All you need is the correct approach, information, and equipment. It is more cost-effective to have a basic understanding of the procedure so that you don’t have to call a plumber or another specialist every time something goes wrong. Particularly in the current era, when science has advanced so far and such gadgets are easily accessible with a handbook to help with comprehension.

However, if you are unsure that you can manage the procedure prudently, if you are not skilled with instruments, or if constant attempts fail, it is best to seek professional help. Drilling into a wall without first examining the pipeline can result in catastrophic harm. Damaged pipes produce water leaks in the pipelines, which can result in very expensive damage or even personal injury. You have the option of getting advice and guidelines from professionals over a cell phone or by calling them at home.

Leave a Reply

Your email address will not be published.

Social Media Auto Publish Powered By : XYZScripts.com